Gremsy Hyper Quick
6X Multispectral Sensor Gimbal Connector Integrations - Gremsy T3/S1 Hyper Quick
The 6X gimbal with the T3/S1 mounting configuration can be used with the Gremsy T3 or S1 Hyper Quick receiver.
6X - T3/S1 Interconnect
6X Thermal - T3/S1 Interconnect
Serial Connection
For T3/S1 configurations the serial lines are connected the TX2/RX2 lines on the Gremsy receiver.
Pinout Table
| Pin | Signal |
|---|---|
2 | TX2 |
3 | RX2 |
6 | GND |
Example Cable
Ethernet Connection & PPS
The ethernet lines from the gimbal are connected to AUX S1, S2, S3, S4 on the Gremsy receiver. AUX S5 is connected to PPS.
Pinout Table
| Pin | Signal |
|---|---|
5 | PPS |
6 | RX_N |
7 | RX_P |
8 | TX_N |
9 | TX_P |
Example Cable
Mechanical Connection
Where to Purchase
Mounting Specifications
Last updated
