Electrical Connectors

6X Multispectral Sensor Electrical Connectors Integration Information

Information

The following tables list pin descriptions of the sensor connectors. All 3.3V UART and 3.3V I2C interfaces are not 5V tolerant. For additional detail on sensor interfaces contact Sentera Support.

The sensor can auto-negotiate the Ethernet speed. Therefore, only four pins are required for a slower 10Base-T or 100Base-T speeds. All eight pins are required for communication at a 1000Base-T speed. Depending on your host platform, your power connection method may vary.

---

J1 - Power In

Item	Manufacturer	Series	Part Number
Onboard Connector	JST	GH	BM04B-GHS-TBT
Mating Connector	JST	GH	GHR-04V-S

---

J2 - Expansion Port

Item	Manufacturer	Series	Part Number
Onboard Connector	JST	GH	BM12B-GHS-TBT
Mating Connector	JST	GH	GHR-12V-S

---

J3 - Power I/O

Item	Manufacturer	Series	Part Number
Onboard Connector	JST	GH	SM06B-GHS-TB
Mating Connector	JST	GH	GHR-06V-S

---

J4 - Ethernet

Item	Manufacturer	Series	Part Number
Onboard Connector	JST	GH	SM08B-GHS-TB
Mating Connector	JST	GH	GHR-08V-S

---

J5 - USB-C

Item	Value
Power Distribution (PD)	No
USB 3.1	Yes

---

J6 - Micro SD Card

Item	Value
exFAT Support	No
UHS-I	Yes
UHS-II and above	No
SD Express	No