Freefly Astro

6X Multispectral Sensor Installation - Freefly Astro

6X & Light Sensor

Instructions

1. Install light sensor/GPS into mounting tray.

2. Install 6X gimbal into smart dovetail.

3. Secure smart dovetail latch.

4. Connect USB-C cable into light sensor.

5. Secure USB-C Cable.

6. Connect USB-C cable to gimbal.

7. Power On the aircraft.

The light sensor is connected to the USB-C port on the upper portion of the gimbal not the USB-C port on the sensor itself.

If a light sensor is not bring used, simply omit the related steps.

---

Light Sensor/GPS Mounting

If a Light Sensor/GPS was purchased with the 6X, the hardware to mount to the drone needs to be installed. See the instructions linked below.

pageFreefly Astro