Freefly Astro

Incident Light Sensor Installation - Freefly Astro

Light Sensor / GPS Mast


  1. Attach the mounting tray to the mast using the attached adhesive tape.

  2. Use the provided M3 x 8mm screws and 2.5mm hex driver (provided with Astro) to attach the mast to the aircraft.

When installed correctly the Light Sensor/GPS mount should allow the Astro to fit in the case while still attached. However, the light sensor itself will need to be removed from the mounting tray.

Last updated


Sentera 6X Multispectral Sensor

6X Product PagePurchase 6X

Sentera Calibrated Reflectance Panel

Purchase Reflectance Panel