How To Update

Download Firmware Update File

Before You Start

Data will be deleted during the firmware upgrade process. Make sure to copy the data off your sensor before performing the update.

This Process works on Windows or Mac.

Power On Sensor

Power the 65R using the AC adapters or keep it attached to the aircraft and turn the aircraft on.

Connect Sensor to Computer

Open Sensor Webpage

In a web browser (no internet required) type 192.168.42.1 into the address bar and press enter.

pageHow To Access Web User Interface

If the sensor is being powered by the AC adapter the screen will appear red with a warning message.

Select Update Firmware

Apply Firmware File

Allow Update to Execute

The software update process begins and may take several minutes. Do not turn off the power or disconnect the cable during this process. It may reboot several times during the process.

Allow Sensot to Self-Reboot

Complete

Once complete, the web page will refresh. You can check the firmware version after the web page refreshes by checking the 'Current Version' at the top of the update page, or the version in the lower left of the web page menu bar.